For sports flooring, after the construction is completed, it is necessary to apply special resin for sports flooring on the surface for daily maintenance. In normal times, you only need to use a broom, vacuum cleaner or a damp cloth dampened with water to keep the floor clean. In order to avoid contamination caused by sanding the soles of the sports floor, it is recommended to lay dust-proof carpets at the entrance and exit of the gates to prevent the sand under the shoes from being brought into the room. Sand, sharp objects, etc. will scratch the floor surface, please clean it with a broom or vacuum cleaner in time.
For difficult-to-remove pollution, try applying a special cleaning agent for sports flooring to the floor surface. After a few minutes, scrub with a soft plastic brush. Remember not to use excessive force to avoid damaging the floor surface. Then, after the floor is used for 6 months, if it feels dull, it can be coated with a layer of wax.
The specific cleaning and cleaning procedures are as follows:
Use a broom or vacuum cleaner to clean the floor surface.
2. Dilute the cleaning agent according to the degree of contamination (please contact the manufacturer for confirmation of the dilution).
3. Wipe the floor surface with a rag with a cleaning agent and place it for a few minutes before sweeping the special sports floor to the speed of the sander.
4. Polish to the lowest speed. Or, scrub with a soft plastic brush. Do not use excessive force to avoid damaging the floor surface.
5. After grinding, immediately after the cleaning is completed, the cleaning agent's sewage is recovered. The floor is cleaned with a clean rag (towel) before the floor is dry, and the washed sewage is wiped clean.
After cleaning, do not use it until the floor is fully dried.
Five maintenance methods for assembling sports flooring
the first. In the process of assembling the sports floor, if individual floors are found to be shelled or peeled off, the floor should be taken in time, the old glue and ash should be removed, and the new glue should be compacted. It is also the best maintenance method to wax once a month, but wipe the water vapor and stains before waxing.
Second. During daily use, be careful to avoid scratching the floor with heavy metal sharps, glass tiles, studs, etc.; do not drag the floor when moving furniture; do not let the floor touch open flames or place high-power electric heating directly on the floor. It is forbidden to place strong acid and strong alkaline substances on the floor; it is absolutely forbidden to immerse for a long time.
Third. To keep the indoor air flowing smoothly, do not cover it with plastic paper or newspaper, so as to avoid the surface film being sticky and tarnished for a long time. The humidity in the room should not be too large, keep the assembled floor dry and smooth, and clean it with a cotton swab.
If large-area flooding occurs inadvertently or if it is partially soaked in water for a long time, if it is stagnant, it should be dried with a dry cloth and allowed to dry naturally. It is strictly forbidden to use an electric heater to dry or expose to sunlight.
Fourth. In order to maintain the beauty of the assembled sports floor and extend the service life of the paint surface, wipe it with a neutral cleaning solvent and then wipe it with a wrung cotton swab. Do not use an organic solvent such as acid or alkaline solvent to scrub. To clean the floor, pay attention to the dry humidity of the mop, and avoid mopping the floor when the moisture of the mop is saturated.
Fifth. The assembled sports floor can be put into use immediately after laying.